ScreenLine
2
technical specification
SL20M SL22M plissé
System M
M
SL
20M
plissé
PLEATED BLIND
The ScreenLine
®
SL20M or SL22M pleated blind with motor inside the head rail for incor-
poration within a double-glazed unit, is manufactured in accordance with high technical
specification and production standards.
The blind raising / lowering functions are achieved by way of an encoder motor that per-
mits a constant speed resulting in a guaranteed synchronized function for multiple blinds.
Special software determines the setting of blinds end stops, by a process of self-learning.
The motor has two speeds. The blind slows before reaching the top and bottom limits in
order to avoid excessive stress on the cords and to guarantee a longer life to the compo-
nents. Faster speed for raising and lowering. The motor and the entire electronic blind
management system are positioned within the head rail, on a specially designed slide
incorporating a shock absorber system to reduce any vibration and significantly reducing
any “noise” effect. The slide is also equipped with a specially integrated electric socket
with a snap-in connector to the spacer bar allowing connection to the external power
supply, thereby maintaining a complete hermetic seal to the unit. The motor is installed
inside the head rail at a higher level in respect of the winding system and the drive is trans-
mitted through a “special” corner key; this system allows the position of the first hole in
SL
22M
plissé
SL20 22M plissé_GB 15-05-2007 9:45 Pagina 2
