Checklist Prior To Filling Your Spa
Never operate equipment without correct water in your Spa. Serious damage to the pump and/or heater may occur.
Damage caused to the pumps or heater through poor water chemistry will not be covered by the SCS Industries
Water Tight Warranty.
Remove all access service panels around the exterior
of the Spa, inspect for any item that may have come
adrift or loosened during transport. Leave doors
off until Spa is filled with water and a check for l
eaks has be undertaken.
Check barrel unions on all pumps and heaters to
ensure they are tight; as they may loosen during
transport.
They are not a Warranty item, and must be
tightened prior to Start Up.
Check external drain/fill valve (if installed) is closed
and drain cap tight.
Pg. 17
Checklist
Barrel Unions
