Pg. 4
Spa Hardware
Orientation
Touchpad Control Centre
–
located on the topside of your Spa.
This touchpad operates pump/s,
blower, temperature adjustment and
other ancillary functions that you may
have, such as filter cycles, lights and
diagnostic codes.
Control Box
– where power supply, blower,
ozone (if used) and circulation pump are
connected. Located in the engine bay
o f
your spa.
Main and Boost Pump
– (if applicable).
Located in the engine bay of your Spa, this
is the largest of the pumps in size and power.
Used for creating water pressure through jets.
Also used for filtration in the case of a 2-speed
pumps option (refer to Controller Instructions).
