background image

TB-9107

 Page 2 of 14

© 2021 DESCO INDUSTRIES INC

Employee Owned

SCS 

- 926 JR Industrial Drive, Sanford, NC 27332

East: (919) 718-0000 | West: (909) 627-9634 • Website: 

StaticControl.com

A. Status LEDs:

 The blue LED will illuminate when the 

ionizer is powered and its balance and discharge times 

are below the alarm thresholds. The negative red LED 

will illuminate and audible alarm will sound when the 

balance exceeds the negative balance alarm threshold. 

The positive red LED will illuminate and audible alarm 

will sound when the balance exceeds the positive 

balance alarm threshold. Both the negative and positive 

red LEDs will illuminate and audible alarm will sound 

when the discharge time exceeds the alarm threshold.

B. Volume Pushbutton Switch:

 Toggles the ionizer's 

settings for the audible alarm and balance alarm. 

Feature

Procedure

Buzzer Volume

1.  Push and release the switch 

while the ionizer is powered.

2.  The ionizer will toggle its 

buzzer volume through 8 

different settings. The 8th 

setting disables the buzzer.

Balance Alarm 

(CE Mode)

1.  Power the ionizer OFF.

2.  Push and hold the switch while 

restoring power to the ionizer.

3.  The buzzer will chirp once to 

indicate that it is in Critical 

Environment Mode.

Balance Alarm 

(Standard Mode)

1.  Power the ionizer OFF.

2.  Push and hold the switch while 

restoring power to the ionizer.

3.  The buzzer will chirp twice to 

indicate that it is in Standard 

Mode.

C. Ethernet Port:

 Provides network communication 

between the Ion Pro™ Benchtop Ionizer and SCS 

Static 

Management Program (SMP)

.

D. Power Inlet:

 Connect the power cord here.

E.  Fan Speed Switch:

 Rock the switch to the II position 

to set the fan speed to HIGH. Rock the switch to the I 

position to set the fan speed to LOW. Rock the switch to 

the 0 position to power the ionizer OFF. 

F.  Power Outlet:

 Use the SCS 770118 power cord to 

daisy-chain power to another 9 ionizers. Up to 10 Ion 

Pro™ Benchtop Ionizers may be powered in one daisy 

chain.

Packaging

1  Ion Pro™ Benchtop Ionizer

1  Power Cord with North America Plug (770116 only)

1  Emitter Point Cleaner

1  Certificate of Calibration

Features and Components

Figure 2. Ion Pro™ Benchtop Ionizer features and 

components

A

C

F

D

B

E

Summary of Contents for 770116
















Reviews: