- 39 -
EN
10
39
Registration
The supplied handset is already registered with
the number 1.
3. Use
to scroll through the Base
names list, press the
key to choose a base
to your necessary. The handset will search for
the
requested
base
and
the
relevant
information will flash on the LCD.
You can register up to 5 handsets
(include an outdoor station) to the same base in
order to share the same line with other people.
Before registering a handset to the base, you
should press and hold the
key on the bottom
of the base for about 5 seconds then release it.
REGISTER
1. Press the key.
2. Press
or
key repeatedly to choose
, then press the key.
or
key
4. If the base is found, you will be prompted to
enter the PIN code (the default one is 0000).
Enter it then press the
the PIN code
is correct, the Registration tone will sound and
then the base assigns a number to the
handset, otherwise a warning tone will sound,
and then the handset returns to the previous
registration state.
5. If the base is not found, the handset will
behave
according
to
the
Out
of
Range
condition.
key. If
MENU/R
MENU/R
MENU/R
MENU/R
Installing Batteries
Slide the battery cover in the direction of the
arrow and pull it out.
Insert new batteries as indicated, matching
correct polarity (+,-).
The rechargeable Ni-MH batteries (AAA size, 1.2V,
600mAh) come with your phone. Install the batteries
before use.
2.
1.
Indoor phone
3. T o
r e p l a c e
t h e
b a t t e r y
cover, slide the cover up
until it snaps in place.
Reversing
the
orientation
may
damage the handset.
The batteries need to be replaced if
they do not recover their full storage
capacities after recharging.
When
replacing
the
batteries,
always use good quality Ni-MH re-
chargeable
batteries.
Never
use
other
batteries
or
conventional
alkaline batteries.
Notes
:
