4
S512-C InstaScan Scanner
The S512-C scanner is designed for applications or configurations that
require the scanner to be a considerable distance from the tags, or where
numerous tags are required to be read simultaneously.
The scanner provides two coaxial connectors for supporting up to two external
antenna pairs. Each antenna plugs into its own connector on the rear
panel of the scanner.
Warning -- RF cable connections should be tightened to 8 inch
pounds. Over tightened RF cables damage the ports on the
antennas and the S512-C. Loose connections can result in de-
creased system performance.
Warning -- Attempting to transmit power to open scanner ports
(i.e. Neither and antenna nor a load is attached to the port) will
will
will
will
will
cause serious damage to the S512-C.
(See Page 12 for correct antenna and/or load configuration)
Figure 2
.
S512-C InstaScan Scanner
DRAFT
Summary of Contents for INSTASCAN S512-C
Page 47: ...4 3 DRAFT...