background image

The ScyTek

Galaxy 5000RS-DBP 

Series is a 

Combination Vehicle Security and Remote Starting

System

Galaxy 2000RS-DBP 

Series is a Remote Starting with keyless entry.

featuring a built-in "ScyNet Network Port" that allows direct connection of optional accessory modules and

a PC interface offering expanded system operation.   With proper installation this system will provide

superior protection and performance for many years to come. 
The Galaxy’s 5000/2000RS  Series built-in remote starter is designed to offer maximum convenience by

remote starting your vehicle’s engine, turning on the heater/air conditioner, and then running for a pre-

determined time to provide a comfortable environment once you enter your vehicle.
To ensure the safety and security of the system while it is remote started, the Galaxy 5000/2000RS-DBP

Series employs several safeguards.  In the event the alarm is triggered while the engine is remotely running,

the remote start will immediately shutdown to prevent unauthorized users from attempting to drive the

vehicle.  The system is equipped with a hood pin input to prevent access  to the engine compartment while

the vehicle is remotely running.  The Valet Mode prevents the remote start feature from operating in the

event the vehicle is to be serviced.  Finally, the brake pedal also acts as a safety by shutting down the

remote start when pressed.

System Contents:

Main Unit with built-in ScyNet Network Interface Port

One 5-Button 2-Way LCD Remote  and One 1-Way 5-Button Remote Transmitter(

RS-2W-1 models )

Two 5-Button Random Code Remote Transmitters (

RS & SP models )

High Output 6-tone Siren with 5000RS 

Dual Stage Shock Sensor with 5000RS

Status LED/ Coded Emergency Override/ Valet Switch/ Call button built into the antenna (See Page 30)

Optional ScyNet Network Interface Accessories:

ScyNet Network Interface Software

Options and Convenience Features

**

This ScyTek system includes several optional inputs and outputs allowing the creation of a completely

personalized security and convenience system by offering many optional features such as:

**May require additional parts and/or labor, see store for details.

· Second Car Operation

· Keyless Entry

· Two Stage Door Unlocking

· Starter Defeat

· Horn Honk

· Illuminated Entry

· Turbo Timer

· Remote Window Control

· Power Trunk / Hatch Release

· Glass Breakage Sensor

· Radar Sensor

· Remote Head Lamp Control

· Back-up Battery Siren

About  Your  System

Some of the features described in this manual may require additional parts and/or labor, and may not be
included as part of the standard installation of this unit.  Additionally, many features of these systems

have selectable options that must be activated or programmed during the system’s installation.  These

items will be identified in the following sections.  Please discuss these features and any questions you

may have regarding the installation of this product with Your Authorized Dealer.

Galaxy 5000/2000RS-DBP   -  Page 1

Summary of Contents for 2000RS

















































Reviews: