Scytek electronic Astra 1000RS Series, Product Manual

Astra 1000RS Series  -  Page 9

Manual/Automatic Transmission Mode

The Astra 1000RS Series is designed to be used in vehicles with automatic transmission only. 
Astra 1000RS-M  is designed to be used in vehicles with manual transmission only.

Remote Starting Manual Transmission Mode

Normal Mode:
With engine running and Handbrake engaged put the vehicle transmission in neutral and remove the foot

from the brake pedal, press the remote start button on your transmitter, parking lights will flash twice

indicating Manual Start Mode is enabled, turn off the Ignition switch, the engine will remain running. Open

and close the door, the system will shut the engine Off. Using the remote Control lock the vehicle’s doors.
Starter is now ready for remote start operation.

Starter Ready Mode is canceled any time the door is opened; hand brake is released or any

other error condition.
To Remote Start the System:

1.  Be sure the system is not in Valet Mode.
2.  Press and hold Button 4 

· The parking lights will turn on.
· The engine will start and run for the duration of its programmed Run Time.*
· The heater or air conditioner will turn on (if turned on prior to exiting the vehicle).

*If the engine fails to start on the first attempt, it will repeat the starting procedure 2 more times.  If the vehicle

fails to start after a total of 3 times the parking lights will flash 4 times and the doors will lock (if installed).

Turn on the ignition and press the brake pedal to disengage the remote start feature and drive the vehicle.

Remote Starting Automatic Transmission Mode

To Remote Start the System:

1.  Be sure the system is not in Valet Mode.

2.  Press and hold Button 4 

· The parking lights will flash twice.
·  The doors will lock (programmable)
· The engine will start and run for the duration of its programmed Run Time.
· The heater or air conditioner will turn on (if turned on prior to exiting the vehicle).

To resume control of the vehicle:

1.  Unlock the doors manually or with the Transmitter.
2.  Turn on the ignition.
3.  Press the Brake Pedal to disengage the remote start.

Remote  Start  Features