background image

The ScyTek Galaxy Starter is a start-of-the-art remote starting system featuring a built-in "ScyNet Network

Port" that allows direct connection of optional accessory modules and a PC interface offering expanded

system operation.   With proper installation this system will provide superior protection and performance

for many years to come. 
The Galaxy Starter’s built-in remote start feature is designed to offer maximum convenience by remote

starting your vehicle’s engine, turning on the heater/air conditioner, and then running for a pre-determined

time to provide a comfortable environment once you enter your vehicle.
To ensure the safety and security of the system while it is remote started, the Galaxy Starter employs

several safeguards.  In the event the brake pedal is pressed while the engine is remotely running, the

remote start will immediately shutdown to prevent unauthorized users from attempting to drive the vehicle.

The system is equipped with a hood pin input to prevent access  to the engine compartment while the

vehicle is remotely running.  Finally, the Valet Mode prevents the remote start feature from operating in the

event the vehicle is to be serviced.  

System Contents:

Main Unit with built-in ScyNet Network Interface Port

Two 5-Button Random Code Remote Transmitters

Status LED

Coded Emergency Override / Valet Switch

Optional ScyNet Network Interface Accessories:

ScyNet Network Interface Software

Two-Way FM Paging Module w/ LCD Transmitter

Options and Convenience Features

*

This ScyTek system includes several optional inputs and outputs allowing the creation of a completely

personalized convenience system by offering many optional features such as:

*May require additional parts and/or labor, see store for details.

Galaxy 2000RS-2W  -  Page 1

· Second Car Operation

· Keyless Entry

· Two Stage Door Unlocking

· Horn Honk

· Illuminated Entry

· Remote Window Control

· Power Trunk / Hatch Release

· Remote Head Lamp Control

About  Your  System

PLEASE NOTE:

Some of the features described in this manual may require additional parts and/or labor, and may not be included

as part of the standard installation of this unit.  Additionally, many features of this security system have

selectable options that must be activated or programmed during the system’s installation.  These items will be

identified in the following sections.  Please discuss these features and any questions you may have regarding the

installation of this product with Your Authorized Dealer.

Summary of Contents for Galaxy 2000RS-2W





























Reviews: