Page 4 - Galaxy 2000RS-2W
Optional 2-way LCD Remote Transmitter Description
The Galaxy 2000RS-2W is compatible with the optional 2-way LCD remote transmitter, offering increased
range and confirmation of any activated features.
Button 1 Locks and Unlocks the system and when held for 2 seconds, activates the system’s Panic feature.
Button 1 also locks/unlocks the doors when the system is in Valet Mode.
Button 2 Activates the Remote Start feature.
Button 3 Activates the Auxiliary 1 output normally used for trunk release (note trunk icon on button).
Button 4 Activates the Auxiliary 2 output. This output will remain on for as long as the button is pressed.
Button 5 is the Confirmation and Programming button. Quickly pressing button 5 will activate the LCD
display’s backlighting for use in the dark. Pressing button 5 for 2 seconds activates the system’s
confirmation feature which will then display the current status of the system (armed, disarmed, engine
running, etc.).
Adding/Replacing Optional 2-way LCD Transmitters
When adding an optional 2-way LCD transmitter to the system, follow these steps:
1. Turn on the ignition key On, Off, On, Off, On, Off, and back On. (Key On 4 times)
· The siren will chirp 4 times.
2. Press and hold the Override switch for 5 seconds.
· The siren will chirp 4 times.
· The LED will illuminate.
3. Press Button 1 on the first transmitter.
· The siren will chirp once.
4. Turn off the ignition key.
5. Repeat steps 1-4 to add an additional 2-way transmitter.
Button 1
Button 2
Button 3
Button 4
Button 5
Summary of Contents for Galaxy 2000RS-2W
Page 1: ...2000RS 2 2W SERIES REMOTE START SYSTEM PRODUCT MANUAL...
Page 4: ......
