background image

Page 12 -  A10-4B

1.

Horn Chirps with Arm & Disarm. 

Selects one of three modes: Normal, Horn Chirps, and Horn

Chirps w/Warn. 
Normal. When selected, the horn will honk only when the alarm is triggered.  
Horn Chirps. When selected, the horn will provide the arm/disarm and trigger indications, allowing the

siren installation to be skipped.  
Horn Chirps w/Warn. When selected, the horn will provide arm/disarm, trigger, and warn-away

indications.  

2.

Arm Mode.

Selects one of three modes: Manual Arming or Passive Arming, and Passive Arming

w/Countdown.  With the Passive Arming w/Countdown mode selected, the siren will chirp every 2

seconds while counting down until the systempassively arms.  Note: If Auto Rearming is selected, the

siren will also chirp during Auto Rearm countdown.

3.

Passive Door Locking.

Selects whether or not the system will automatically lock the doors 10

seconds after the ignition key is turned on.

4.

Ignition Controlled Locks.

Selects whether or not the system will lock and unlock the doors with the

ignition.

5.

Door Input Monitoring.

Selects whether the system begins monitoring the door inputs after 10

seconds or 60 seconds.  For vehicles with interior lights that remain on for an extended period of time

after the doors are closed, set for 60 seconds.

6.

Auto Rearming Mode.

When selected, the system will automatically re-arm 30 seconds after it is

disarmed if the doors have not been opened.

7.

Door Unlock Pulse.

Selects between one pulse or two pulse operation for the door unlock output.

Vehicles that require two pulses on the proper wire to unlock the doors can be interfaced directly

without the use of relays or any additional circuitry by programming the system for double unlock pulse. 

8.

Arming Chirps.

Selects between normal and silent operation.

9.

Extended Parking Lights.

When selected, the parking lights will remain on for 30 seconds after

disarming the system.

10.

Disarm with Auxiliary 1

. When selected, activating the Auxiliary 1 output (usually used to open the

trunk) will disarm the alarm.

11.

Door Lock Pulse Length.

Selects between a 1-second and a 3-second output for door locking and

unlocking.  Program to 3 seconds for vehicles equipped with vacuum door locking systems.

12.

Anti-Carjack Mode. 

Enables Anti-Carjacking protection. 

13.

Anti-Carjack Type. 

Selects one of three modes for Anti-Carjacking:  Active, Passive, or Full-Time. 

Manual. When selected, activating the Panic feature will automatically engage the Anti-Carjacking

feature.
Passive. When selected, the Anti-Carjacking feature will activate whenever a door is opened while the

ignition is on.
Full-Time. When selected, the Anti-Carjacking feature will automatically activate each time the ignition

is turned on.

14.

Ignition Arm Mode. 

Ability to Arm the system with Ignition in On position.

15.

Interior Light Mode. 

Interior Light 30Sec - Upon Disarming, Interior Light Output turns ON for 30 Sec.
Windows 10Sec - Upon Arming, Interior Light Output turns ON for 10 Sec.
Windows 30Sec - Upon Arming, Interior Light Output turns ON for 30 Sec.

Summary of Contents for P10 Series





















Reviews: