Scytek electronic Vectra X5, Product Manual

Page 16 -VECTRA X5

Extended  Features

Ignition Door Locking

For added safety, the Ignition Door Locking feature allows vehicles equipped with power door lock systems

to automatically lock the doors when the ignition is turned on.  If a door is open when the ignition is turned

on, the Ignition Door Locking feature is disabled to protect against locking the keys inside the vehicle. 

If RPM is selected Doors will lock when engine RPM exceed 2.5 times the idle.(tach wire must be connected)

Ignition Door Unlocking

For added convenience, this feature automatically unlocks the doors after the ignition key is turned off.  If

the optional Passenger Unlock feature is installed, the Ignition Door Unlocking feature can be programmed

to unlock only the driver door as a higher measure of safety,  especially when children are present.  The

Ignition Door Unlocking feature may also be completely disabled if desired.

Dome Light Activation

If the optional Dome Light Activation feature is installed, the dome light will turn on when the system is

disarmed using the Remote Transmitter, and remain on for 30 seconds or until the ignition is turned On.

Auxiliary Function Outputs

The VECTRA X5 Series system is equipped with 3 Auxiliary Channel Outputs allowing the convenience

features of the system to be further expanded. Aux-2 output can be programmed for pulsed, timed, or

latched operation and used to add a number of optional features such as:  power trunk release, power

window activation, power sunroof control, auxiliary lighting, audio/video system control, and more.
The 

Pulsed

operation setting allows an output to activate as long as the button is held.(

1-way remote only) 

The 

Timed

operation setting allows an output to activate when the transmitter button is pressed, and

remain activated for 10 seconds or until the transmitter button is pressed again.  

Note: With the optional ScyNet network interface and Wizard software, the timed output can be programmed for any time

between 1 second and 255 seconds.  

The 

Latched

operation setting allows an output to activate when the transmitter button is pressed, and

remain activated until the transmitter button is pressed again.  

Disarm with Auxiliary Function

If the Auxiliary 1 option is installed to activate the vehicle’s trunk release, the system can be programmed to

automatically disarm the alarm when the trunk is opened using the transmitter.  In this manner, the trunk

can be accessed without first disarming the alarm.

Remote Sensor Disable

When parking the vehicle in areas susceptible to unwanted disturbance from animals or strong weather

conditions that could cause the sensors to trigger, the sensor inputs can be temporarily bypassed using the

Remote Transmitter, preventing possible false alarms.
To disable the sensor inputs :

1.  Arm the system normally.

2.  Within 5 seconds of Arming the system, press the Arm button again.

·

The siren will chirp 5 times and the parking lights will flash 5 times to indicate the sensors are disabled.

·

The sensors will remain disabled until the next arming cycle.