8
Settings: Video & Channel
∙ Choose the desired picture quality (High, Medium, Low).
∙ "High" produces the best picture quality at the cost of recording capacity, whereas
"Low" increases the recording capacity at the cost of picture quality.
∙ Once the recording capacity of each type of recording data is reached, oldest data is
overwritten with new data. Back up the recording data on to a separate storage device
on a regular basis.
∙ Choose between Front/Rear and Front.
∙ Front/Rear: Displays video feeds from front and rear cameras on a single screen. Front
camera feed takes up the bulk of the screen, with the rear camera feed shown as a small
window on the upper right corner. Tap on the PIP window to flip between the channels.
(For more information, refer to "Front/Rear Preview" section on page 6.)
∙ Front: Displays video feed from the front camera only (full screen). Video from the rear
camera is not recorded.
Video
Channel
