9
Settings: Sensitivity & LCD Off
∙ Adjust the impact sensor sensitivity.
∙ Tap on the Sensitivity icon to cycle through Off, Low, Normal 1, Normal 2, Normal 3, High,
and Very High in that order.
∙ Impact registration above the specified sensitivity setting while the vehicle is on the move
or parked triggers event recording.
∙ Configure LCD timeout.
∙ Tap on the LCD Off icon to cycle through 30 secs, 1 min, 5 mins, Clock, and
Always On in that order. The LCD automatically turns off after the specified amount of
time.To turn the LCD back on, simply tap on it.
∙ "Clock" displays a clock instead of a blank screen after 1 minute of inactivity.
Sensitivity
LCD Off
Caution)
∙ "Very High" is so sensitive that the black box can recognize bumps on the road or even
loud noises from inside the cabin as event recording triggers. If this occurs, try lowering the
sensitivity setting.
∙ "Off" instructs the black box not to initiate event recording even if actual impact has been
registered. Remember this before using the "Off" setting. ( In Parking mode, event recording
will still take place even if Sensitivity is set to "Off".)
