P:\INSTALLATION INST\Access Controls\INST-917 QUICK REF\INST-917 QUICK REF.vsd REV A 05-09 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email engineer@sdcsecurity.com
SECURITY DOOR CONTROLS
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: service@sdcsecurity.com
917 QUICK REFERENCE/WORKSHEET
NOTE: [ ] means press keys simultaneously
Factory Default Master Code is 1234
Make all electrical hookups per drawings in Installation Instructions
Basic Programming:
1. Enter program mode
2. Program User code:
3. Assign User to Main Relay 0:
4. Set Main Relay time:
5. Assign REX to Main Relay:
Addtional Programming
6. Delete User:
7. Change Master Code:
8. Reset to factory default settings:
9. Master Reset
BEWARE! ERASES MEMORY
BEWARE! ERASES MEMORY
Press
[*1]
Master Code
*
Press
[*1]
Master Code
*
[*2]
User Number
#
PIN Code
*
PIN Code
*
Press
[*1]
Master Code
*
[*0]
User Number
# 0 *
Press
[*1]
Master Code
*
[*3]
User Number of seconds
# 0 *
Press
[*1]
Master Code
*
[*4]
0 *
Press
*
,
red
LED will turn on
Touch wire on Pin 10 (GRY/BLK) to wire on Pin 12 (ORG/BLK)
yellow
LED will turn on.
Release wires. After 2-3 seconds the
green
LED will turn on.
Default Master Code is 1234
User Number from 2-120. PIN code up to 6 digits
Users can be assigned to Relay 0, & outputs 1-3
Time (1-225 sec.)
REX can be assigned to Relays 0, & outputs 1-3
Press
[*1]
Master Code
*
[*2]
User Number
# * *
Press
[*1]
Old Master
*
[*2]
1
#
New Master
*
New Master
*
Press
[*1]
Master Code
* Press
[*9]
*
Code
Code
Code
Deletes user
Master code is User 1
Erases memory
Erases all memory & returns to factory
default Master code of 1234.
Note:
If you make an input error before entering *: wait 5 seconds and the command memory will be cleared automatically (or press # to clear manually). Start again.
Five operating errors within 60 seconds will trigger the Auto Lockout function which disables the keypad for 4 minutes and 15 seconds (255 seconds).
Remember the new Master code.
