Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email engineer@sdcsecurity.com
P:\INSTALLATION INST\ACCESS CONTROLS\E75\INST-E75.vsd REV F 03-20 Page 1
Place provided E75
Template on inside
of door to mark hole
locations.
INSTALLATION INSTRUCTIONS
E75 STANDALONE ELECTRONIC LOCKSET
801 Avenida Acaso, Camarillo, Ca. 93041 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: service@sdcsecurity.com
Keypad Programmable
3,000 Users, 32 Temporary Users
4 to 6 digit PIN Codes
Passage Mode Option
32 Access Groups, Schedules
32 Holidays
4 Authority Levels
Keypad Tamper Lockout
Mechanical Key Override
Battery Powered (4AA)
Blue Backlit Cast Metal Keys
Weather & Vandal Resistant
Retrofit existing Lock Door Prep
Motorized SDC Cylindrical Lockset
Heavy Duty ANSI Grade 1
Vandal resistant Lever Handles
Privacy Mode Option (E75KL & E75PL only)
Electrically Operated Single Point Locks
& Latches, 3hr ‘A’ Label Fire Doors
After drilling
holes in door,
use a 1/4”
Butterfly bit, to
drill the wire
raceway where
shown.
INSIDE
Raceway
1.00"
Diameter
5.00"
min depth
4X 11/32"
Dia. thru
1/2” Dia. thru
1-3/8 Dia.
3/4” deep
Inside of door
After marking hole
locations, drill as
follows;
IMPORTANT
: It is highly recommended that installers first view the “E75 STANDALONE
ELECTRONIC KEYPAD” video available online at https://www.sdcsecurity.com/videos.htm
1
