Copyright © SpectraDynamics, Inc. 2010
3
AC Power LED
The AC POWER LED will turn on when AC power is applied to unit and the unit is
operating properly.
DC Power LED
If the FS100-RM was manufactured with the battery backup option the DC POWER
LED should be on when DC power is applied and the unit is operating properly. If the
FS100-RM is not equipped with the battery backup option, the DC POWER LED will not
be connected but will still be on the front panel.
SMA INPUT
The 5 MHz or 10 MHz +13 dBm signal to be multiplied should be connected to the SMA
connector labeled INPUT.
SMA OUTPUTS
The standard FS100-RM has one 100 MHz output. The additional outputs at 10 MHz,
20 MHz, 40 MHz, 80 MHz and 90 MHz are optional. All the outputs have a nominal
output level of +13 ±1 dBm.
The Front Panel
SDI
The Front Panel
SDI
Summary of Contents for FS100-RM
Page 2: ......
Page 12: ...FS100 RM 1I 6O R02...
