Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
24
5.3 Full Load Transportation
z
Do not keep a full bucket in the high position when moving. Select the proper speed with a full
load during transport. Lower the bucket to contact
the tilt block and run with proper height
(400~500mm above the ground), so that the center of
gravity can be lowered to insure driving smoothly.
z
Check the limit lifting weight of the loader.
Never
overload, which may hurt the machine or people.
Shandong Lingong Construction Machinery Co. Ltd
assumes no responsibility for overload injury or
damage to equipment.
z
Do not drive, turn or brake suddenly and do not
detour.
z
Never
suddenly stop or lower the working
equipment, which may throw out the materials from
the bucket or cause the loader to turn over.
5.4 Drive at Proper Speeds
z
Know the characteristics of the loader, and follow the actual conditions in the working area.
Drive at the proper speed. Select path of drive and method of machining to let the others know.
z
Keep a low speed so as to maintain control easily at all times.
z
Never
drive fast, turn to brake suddenly on rugged, slippery or oblique ground.
z
Slow down when passing over rough or rugged ground with blocks around, which may cause
some problems in controlling the steering wheel. Loader may turn over if operated in the wrong
way.
z
Let the engine run smoothly;
never
drive at high speed.
5.5 Ensure Good Visibility
z
Slow the speed and sound the horn if necessary to let others know, and determine the proper
direction when the visibility is bad or at a narrow crossing.
z
Sand, dust, fog or storm may affect the visibility. Slow down when visibility is poor. When
visibility is not good, stop working until the weather cleans.
