Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
25
z
The loader is a special vehicle. Drive carefully when taking long parts which may block the
visibility. Carefully lift, go forward and backward, and shift gears.
Never
let unauthorized people
go into the working area or give specific directions.
z
There may be some illusion about the height of the
ground and the distance at night, so keep the light on
and drive at proper speed.
z
Keep the front and rear headlights and working lamp
on when working in dark areas.
5.6 Pay Attention to Blockages
z
If there are blockages (roof of buildings or the door frame), keep the loader away from the
blockages when turning or passing.
z
Notice the environment. Slow down and check whether there are some blockages when turning or
going through a narrow passageway.
z
Operate carefully to prevent unstable loads when the ground is uneven and the load is not stable.
5.7 Driving in Dangerous Conditions
z
Do not operate when you are unsure about the
environment. Investigate the condition of the road,
the strength of the bridge, landform of the working
area and all geologic features before working.
z
Pay attention to the depth that the tires sink and the
braking effect on muddy or soft ground.
z
When working in water or swampland, prevent the
bottom of the axle housing from being soaked. Slow
down after passing through water or during rain.
Step on the brake pedal gently and alternately to let
the skid device dry after working in water or in rain.
z
The clay piled on the ground or near the canal is
usually soft.
Never
allow a turn over caused by the
weight or vibration of the loader.
z
Never
drive the machine near hanging things or close to a deep ravine. The machine weight or
