Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
69
1. Air Volume and Power Switch 2.The Switch to Control the Temperature
3. Refrigeration Indicator Lamp 4. Power Indicator Lamp
z
Operating methods
a)
Refrigeration
First-time use, turn the air volume and power switch to high gear after the engine started,
turn the temperature control switch to refrigeration. Turn the air volume to obtain low middle
and high volume of air.
b) Heating
Turn the temperature control switch to the state of off, open the hot water valve the air
volume and power switch, warm air blow constantly. Turn the air volume and power switch
to obtain low middle and high volume of air.
c) Power
indicator
lamp
If the system is normal, the power indicator lamp will come on. If the refrigeration indicator
lamp comes on, the compressor starts working for the refrigeration of air conditioning.
Notice:
Avoid the temperature control switch 3 is always in the coolest position and the air volume
and power switch 2 is in the fan low gear (L position), in order to prevent the evaporator
from frosting.
Avoid the sun shining directly in summer
Please shut the door and window of cab when using the air conditioning; shut the heat source
valve when using for refrigeration; shut the temperature control switch for refrigeration when
using for heating in winner.
Clean the condenser periodically using compress air and cold water, but not using hot water
or steam.
Run the compressor once a week when the refrigeration isn’t used in winner for 1min to
maintain the air conditioning in normal state.
1.2.10 Adjustment of Cab’s Seat
△
!
WARNING
