Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
77
slope, in order to avoid dangerous from power cut.
△
!
WARNING
Never
use the parking brake switch to brake or slow the
speed of the machine while running unless in an
emergency.
3.4 Stopping
3.4.1 Steps to Stop
z
Release the accelerator, and press the brake pedal to
stop the machine. Put the gear control lever in the
neutral
position.
z
After safely stopping, push the parking brake switch to
lock the machine in parking state.
z
Level the bucket and other work equipment to the
ground.
z
Stop the machine on the level ground where there is no
danger of stone falling, coasting or flooding. If it is necessary to stop the machine on a slope,
wedge the wheels to prevent movement.
3.4.2 Steps to Stop Engine
z
Let the engine run freely for 5 minutes to cool all the parts equally.
z
Pull the flameout control soft shaft.
z
Turn the key to
OFF
position. And draw it out and keep in a safe place.
△
!
WARNING
Never
pull the flameout control soft shaft before the engine
is cooled.
3.4.3 Leaving Loader
