Operation & Maintenance Manual
──
LG968 /969Wheel Loader
38
9 SAFETY TRANSPORTATION
9.1 Assemble and Disassemble the Machine
z
Pay attention to assembling and disassembling since it is dangerous. Keep the engine speed low
during assembling and disassembling machine.
z
Load and unload machine at plane ground and remain a certain safety distance to road side.
z
Fix the tire well during assembling and disassembling machine to make sure it will not move. Put
cushion under the gangway.
z
Slope boards should be strong enough with sufficient length and width to form a safe slope. The
angle with the ground should not larger than 15
°
. Remain some distance between slope board
and board, board and machine.
z
Make sure the height of two sides of board is the same to ensure firm orientation.
z
Keep the board surface clean, and there are no lubricant, oil, ice and incompact materials. Clean
the dirt of the tire.
z
Never
turn on the slope board. If it is necessary, turn outside the board and then drive back.
z
Lock the direction mechanism after assembly, wedge the tire and pack the machine tightly with
cord.
9.2 Transportation on the Ground
z
Obey the rules about weight, height, width and length prescribed in national and local laws for
transporting the machine using tow truck. Obey the traffic rules.
z
Make sure the weight, height, width and length of machine before deciding the transport routine.
z
Make sure the allowed limit of weight bearing when passing bridges or private buildings. Obey
the relative rules when driving on the public roads.
z
The machine may be disassembled when using other transportations. Please contact with
Shandong Lingong construction machinery Co. Ltd. or their accredited representative
9.3 Lifting
Use the hook of front frame to transport the machine to ship or train.
Select proper lifting equipment according to the weight of loader, otherwise it is dangerous to surpass
the weight limit.
