Operation & Maintenance Manual
──
LG968 /969Wheel Loader
55
Lighting
If the starting switch is at
ON
position, combined switch is turned to “
OFF
” position, lift the
switch, high beam of front headlight will be on, if the combined switch is turned to
“
”
or
“
”
position, auxiliary light, rear position light, back light will be on, lift the switch,
headlight will be on.
High/Low Beam Headlight
Start switch is at
ON
position, when the combined switch is turned to
“
”
position, Low
Beam Headlight will be on; push down the switch, High Beam Headlight will be on.
Turning Light
Push this switch forward, left turning light will be on; push this switch backward, right turning
light will be on.
NOTICE:
All the turning lights will be on at the same time during operating this switch. Please put the
switch back manually.
z
Speed Control Lever
This lever controls the direction and travel speed of
the machine.
This machine employs four-front and three-rear
gearshift box. Put the lever at the proper position, the
desired speed can be derived.
¾
Forward
Ⅰ
,
Ⅱ
are used for operating
¾
Forward
Ⅲ
,
Ⅳ
are used for traveling
¾
Hold
are used for parking
¾
Reverse
Ⅰ
,
Ⅱ
,
Ⅲ
are used for reversing.
z
Working Equipment Control Handle
This lever can control bucket and lift arm, there are four
positions forward and backward, which are used to
operate the lift arm to lift, neutral, lower and float; there
are 3 positions left and right that are used to control the
bucket Forward Tilt, Neutral, and Rear Tilt.
(1)
Bucket
