SDT SDT200, User Manual

MAN.200.EN--05--SDT200-user-manual-Eng.docx

9/19

Taking and storing a temperature 

measurement 

This feature is optional. 

Select the built-in pyrometer by highlighting the 

T

 in the upper left corner of the display with 

the 

F1 button

. 

Activate or deactivate the laser pointer using the 

F2 button

Measurement settings 

Press the 

F3 button

 to enter the Measurement Settings menu. 

You can : 



Adjust the emissivity coefficient from 1 to 0.01 



Switch between Celsius, Fahrenheit and Kelvin physical units 

To modify the parameters of the selected setting : 



Use the 

Up and Down arrow buttons

 to switch form one field to another. 



Use the 

Left and Right arrow buttons

 to modify the value of the selected field. 



Use the 

Enter button

 to save the changes and return to the previous menu. 

Use the 

F1 button

 to save the settings as preferred configuration 

Use the 

F2 button

 to load the settings associated to the preferred configuration 

Use the 

F3 button

 to go back to the temperature measurement screen using the modified 

settings. Note that the preferred configuration is reloaded at startup of the SDT200. 

Freeze measurement 

Press the 

M button

 to freeze the measurement. 

Store measurement 

Press the 

Store button

 to save the measurement. 

Then highlight the chosen memory location using the 

Up and  

Down arrow buttons

 and confirm by pressing the 

Enter button

, or the 

F1 button

 to cancel 

measurement storage.