Version 5
page 21
Actions:
①
Select a single file from the list
②
Press
‘Delete’
(bottom right) to delete
③
Press - transfer the file to a USB drive
Press 'Quit' - return to the main screen
Press 'Delete All' - delete all files.
④
Image measurement details* for the selected
image are shown:
Date/Time
of measurement
Amplitude
(dB)
Display Base
(dB)
Image Range
value (dB)
Amplification
value (dB)
Frequency Band
(kHz) set
Image Mean Setting
Estimated Flow Rate
(LFE) index value
⑤
Memo to Image
–
see below.
(*This will not be recorded for videos.)
Memo to Image
After selecting an image, tap the memo icon to add notes
to an image. An on-screen keyboard and note area will
pop-up.
After entering the memo
/note tap ‘Save’ to continue.
Image Range
Setting
This function sets the range of the minimum (blue) and
maximum (red) values of the signal power displayed on
the screen. This means that the width of the signal power
can be adjusted. User can set a minimum of 0 dB (full
range) to a maximum of 10 dB, and the higher the value,
the greater the width of the signal power.
If the image range is set to 0 dB, signal forming is applied
throughout the screen (Full Range).
