Vigilant User Manual
134/232
Peak/Phase
Field
Description
Tag
Text that identifies unequivocally the
Parameter
within the
Point
. Only ASCII
alphanumeric characters are allowed, including ”.”, “
-
”, and “_”. Any other special
characters or blank spaces are not allowed. First character must be alphanumeric.
Maximum length is 25 characters.
Hidden
This option causes the
Parameter
to be ignored on the
Dashboard
, so that it will not
be displayed on any of its widgets. The value will still be calculated and updated
each monitoring cycle, so it can be used for
internal calculations (Machine States, Formula points, etc.).
Name
Text used on the
Dashboard
to identify the
Parameter
. ASCII alphanumeric
characters are allowed, including ”.” , “
-
” , “_” and
blank spaces. If none is given the
tag will be used.
Description
Allows the user to include a description of the
Parameter.
Type
Selects from a pull-down menu the type of
Parameter
to measure.
Peak order
Selects the order frequency (nº of times the Machine speed) that will be used to
calculate the peak and phase measurements. The value must be any positive integer
value up to 100x.
Minimum
tachometer freq.
Informs about the minimum tachometer frequency that the system requires to
calculate the peak and phase measurements.
Property
Selects the property of the Parameter from a pull-down menu. For vibration points
the options available are Acceleration, Velocity and Displacement. The signal will be
integrated or double integrated if required.
Custom unit
Enables/disables the possibility to select the units for the Parameter measurements
by using the pull-down menu Units. In case this checkbox is selected the general
