Vigilant User Manual
136/232
Process mode Selects the second
Process mode
that will be used, along with the one from which this
Parameter
is being added, to calculate the Smax value. The pull-down menu will show
only those
Processing modes
of the different points of the
Machine
that are compatible
with the current one. Both
Processing modes
require for example to have the same
sampling frequency and units.
Custom unit
Enables/disables the possibility to select the units for the Parameter measurements by
using the pull-down menu Units. In case this checkbox is selected the general system
preferences will be ignored and the Parameter will be represented with the units
selected in this configuration page.
Unit
Shows the units of the Parameter. If the Custom unit field is checked the interface
allows selecting another unit from the pull-down menu.
Minimum
Sets the minimum value for the validation range of the amplitude part of the Parameter.
Values outside the validation range are considered bad measurements. They do not
trigger alarms and produce an error on the system.
Maximum
Sets the maximum value for the validation range of the amplitude part of the
Parameter. Values outside the validation range are considered bad measurements.
They do not trigger alarms and produce an error on the system.
12.19.
Spectral Bands
Spectral bands
are objects included in the machine configuration that define different frequency ranges
used to calculate
Spectrum RMS, Calculated peak
and
Calculated peak to peak
type parameters.
By selecting this menu option, the interface will show the list of
Spectral bands
. From this list they can
be added, removed, and configured.
By clicking on one of the items the interface will show its configuration. There are three types of
Spectral Bands
that can be configured:
Single Band
,
Harmonic Family
and
Sidebands
.
