Vigilant User Manual
96/232
Components
Shows all the
Components
of the
Machine
. Clicking on one of them will access its
configuration page.
Points
Shows all the
Points
defined on the machine. Clicking on one of them will access its
configuration page.
States
Shows all the
States
defined on the machine. Clicking on one of them will access its
configuration page.
Storage
Shows all the
Storage Strategies
defined on the machine. Clicking on one of them
will access its configuration page.
The speed of the machine can also be calculated using the parameter
“Frequency extraction” calculated from a dynamic point. In order to use
this parameter as the speed reference of the machine the system needs to
get it from an actual point. This may be done by creating a Formula type
Static Point and linking it to the frequency extraction parameter.
The following chapters describe the configuration of the
Components, Points, States, Strategies,
Processing Modes and Parameter
objects that compose the
Machine
. Their configuration defines the
monitoring behavior of the unit.
12.14.
Alarms
This section displays a table where users can configure the alarm levels for all the measurements
defined on the machine (parameters and static points), independently for each
Machine
state. The
table allows quick and easy access to the alarm limits.
Field
Description
State
Alarm levels may differ depending on the machine
State
. This control selects one of the
available states for the machine and shows its corresponding alarm values in the table.
Advanced
Show the fields
Hysteresis
and
Repetitions
and use them to define with more accuracy
the behavior of the alarms.
Autoassign
alarms
Enter the dialog that enables automatically assigning the alarm values to the selected
parameters using statistical calculations
[Select]
The checkboxes enable selecting a group of parameters to execute some action on
them, like for example assigning statistical alarms.
Point
Point
to which the parameter is related.
