Vigilant User Manual
209/232
13.17.1.
Configuration
The following picture shows its configuration settings. Once the
Widget
is selected click on the
shortcut key “c” or the button to display its configur
ation form.
Field
Description
Name
Defines the name to the
Widget
. It will be shown at the upper bar of the
Widget
.
Line Color
Selects the color of the Full spectrum line.
Machine
Selects the machine of the Full spectrum from the pull-down list.
Point
Selects the dynamic point of the Full spectrum from the pull-down list.
Proc. Mode
Selects the
Processing mode
of the Full spectrum from the pull-down list.
Field
Description
X-Axis
Sets the frequency units of the Full spectrum. Select between
Default, CPM, Hz
or
Orders
.
Default
will use the units defined on the
User Preferences
.
X View
Sets the maximum and minimum values visible in the X axis. Note that clicking on the
Reset zoom
button with this option enabled will reset it to the values set in this form.
Y-Axis
Shows the property of the Y axis. For vibration sensors this field selects between
Acceleration
, Velocity
or
Displacement
. The one defined on the
Machine-Point-
Processing Mode
in the
main Configuration
will be shown as
Default
.
Y View
Sets the maximum and minimum values visible in the Y axis. Note that clicking on the
Reset zoom
button with this option enabled resets it to the values set in this form.
Detector
Selects the detector to be applied to the spectrum amplitude (RMS, Peak, Peak-Peak).
