6
Remote Control Bracket Installation (wireless remote sold separately)
1. Take off mounting plate from the back of bracket. secure mounting plate on selected location with
the two (2) self-tapping screws that come with the product. Fit bracket to mounting plate as shown.
！
Use correct product for your power source (DC 12 Volt). Use of the wrong voltage will damage
product and may cause safety hazard.
Operation
12V Powered Wireless Remote Control (supplied with this spotlight)
1. Press arrow key to control rotation of the spot light.
2. Change light beam coverage by spot/flood switch (see picture below).
3. The operation is the same for the wireless (battery operated) remote control sold separately.
12V Powered Wireless Remote
Supplied with the Spotlight
Battery Powered Wireless
Remote - Sold separately
