6
PAGE 80
Additional Recommended
Protection
Proceed as follows for adding anti-
freeze solution in the engine:
Install a hose pincher to engine drain
hose near the PTO flywheel guard.
1. Engine drain hose
2. Hose pincher
Disconnect engine water outlet hose
from cylinder head.
1. Engine water outlet hose
Temporary install a short piece of hose
to engine water outlet at cylinder
head.
Insert a funnel into the hose and pour
about 1 liter (1 quart) of antifreeze so-
lution mixed with water.
Remove temporary hose and recon-
nect engine water outlet hose to cylin-
der head.
Remove hose pincher from engine
drain hose.
NOTE:
Most of the antifreeze will
drain out when removing the hose
pincher. Use a container to recover it.
DISPOSE OF ANTIFREEZE AS PER
YOUR LOCAL LAWS AND REGULA-
TIONS.
NOTE:
Although antifreeze will mainly
drain out, the antifreeze has mixed
with the water that was possibly
trapped in the cylinder water jackets
and thus preventing freezing prob-
lems.
NOTE:
At pre-season preparation,
drain the remaining antifreeze from
cooling system prior using the water-
craft.
F06E04Y
2
1
F06E05Y
1
-
CAUTION
Always use antifreeze specially
formulated for aluminum en-
gines.
SMO9802A.FM5 Page 6 Tuesday, August 4, 1998 9:28 AM
www.SeaDooManuals.net
Summary of Contents for 1998 GSX Limited 5625
Page 1: ...www SeaDooManuals net ...
Page 11: ...www SeaDooManuals net ...