79
General
• Only perform servicing procedures
which are detailed in this guide. Fur-
ther assistance or information can
be obtained from your authorized
Sea-Doo dealer. In many instances
proper tools and training is required
for certain servicing or repair proce-
dures.
• Maintain the watercraft and equip-
ment in top condition at all times. Ad-
here to the prescribed maintenance
schedules. An annual inspection of
the watercraft is always a good rec-
ommendation that should be fol-
lowed.
• Always use spark plug cable ground-
ing device when removing spark
plugs.
• The bilge should be kept clean of oil,
water or other foreign materials.
• Do not attempt to lift the watercraft
without special equipment and train-
ing.
• The engine and the corresponding
components identified in this guide
should not be utilized on product(s)
other than for which they were de-
signed. Maintenance procedures and
specified tightening torque should be
strictly adhered to. Never attempt re-
pairs unless the appropriate tools are
available. These watercrafts are de-
signed with parts dimensioned in
both the metric and the imperial sys-
tems. When replacing fasteners,
make sure to use only those recom-
mended by Bombardier. If required,
contact your authorized Sea-Doo
dealer for further servicing informa-
tion.
smo2004-002a.book Page 79 Thursday, August 21, 2003 2:54 PM
www.SeaDooManuals.net
