BREAK-IN PERIOD
CAUTION: Scrupulously follow the
instructions of this section. Failure
to do so may reduce the engine’s
life and/or performance.
With Sea-Doo watercraft powered by
Rotax
®
engines, a break-in period of
10 hours is required before continuous
operation at full throttle.
To achieve a good break-in, vary the
engine speed every few minutes with
brief wide open throttle accelerations
of up to 15 seconds.
NOTE: DO NOT
add injection oil in the
fuel tank for the break-in.
CAUTION: Continued wide open
throttle runs and prolonged cruis-
ing without speed variations should
be avoided, this can cause engine
damage during the break-in period.
10-Hour Inspection
NOTE:
The 10-hour inspection is at the
expense of the watercraft owner.
It is highly recommended that after
the first 10 hours of operation, the
watercraft be checked by an autho-
rized Sea-Doo dealer. This inspection
will also provide the opportunity to dis-
cuss the unanswered questions you
may have encountered during the first
hours of operation.
_____________________
49
Summary of Contents for 2006 3D RFI
