manualshive.com logo in svg

Sea-doo RXP-X 260, Operator'S Manual

Introducing the Sea-doo RXP-X 260 - an exhilarating watercraft built for speed and performance on the open water. Unlock the full potential of this incredible machine with the Operator's Manual, available for free download at 88.208.23.73:8080. Discover the secrets to mastering every aspect of your Sea-doo RXP-X 260 and enjoy endless water adventures.

Share
Download
background image

TABLE OF CONTENTS

FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Know Before you Go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Safety Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

About this Operator's Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

SAFETY INFORMATION

GENERAL PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Avoid Carbon Monoxide Poisoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Avoid Gasoline Fires and Other Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Avoid Burns from Hot Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Accessories and Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

SPECIAL SAFETY MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Reminders Regarding Safe Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Water Sports and Towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Hypothermia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safe Boating Courses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ACTIVE TECHNOLOGIES (iCONTROL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
iTC (intelligent Throttle Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
iBR (intelligent Brake and Reverse System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SAFETY EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Required Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Additional Recommended Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PRACTICE EXERCISES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Where to Practice Exercises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Practice Exercises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Important Factors Not to Neglect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

NAVIGATION RULES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Operating Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

FUELING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Fueling Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Fuel Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

TRAILERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

IMPORTANT ON-PRODUCT LABELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Hang Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Watercraft Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Compliance Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

PRE-RIDE INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

What to Do Before Launching the Watercraft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
What to Do After Launching the Watercraft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

_______________

3

Summary of Contents for RXP-X 260





























































































































































Reviews:

No comments

Related manuals for RXP-X 260

SeaDoo SPARK 2022 Series Operator'S Manual preview
SPARK 2022 Series
Brand: SeaDoo Pages: 196
Supra Bravura 21 Series Owner'S Manual preview
Bravura 21 Series
Brand: Supra Pages: 90
Cruisers Yachts 3372 Express Series Owner'S Manual preview
3372 Express Series
Brand: Cruisers Yachts Pages: 106
YAMARIN 56 Side Console Owner'S Manual preview
56 Side Console
Brand: YAMARIN Pages: 37
Grady-White Boats Coastal Explorer 191 Owner'S Manual preview
Coastal Explorer 191
Brand: Grady-White Boats Pages: 74
Bavaria VIRTESS 420 Owner'S Manual preview
VIRTESS 420
Brand: Bavaria Pages: 90
J/Boats J/88 Owner'S Manual preview
J/88
Brand: J/Boats Pages: 58
Yamaha 210FSH SPORT 2022 Operator'S Manual preview
210FSH SPORT 2022
Brand: Yamaha Pages: 146
Yamaha 2012 WaveRunner VX Sport Owner'S/Operator'S Manual preview
2012 WaveRunner VX Sport
Brand: Yamaha Pages: 96
Wellcraft Coastal 350 Owner'S Manual preview
Coastal 350
Brand: Wellcraft Pages: 111
Wellcraft 180 SPORTSMAN O/B Owner'S Manual preview
180 SPORTSMAN O/B
Brand: Wellcraft Pages: 180
Seawind 1000XL2 Owner'S Manual preview
1000XL2
Brand: Seawind Pages: 28
NRS Outlaw Series Owner'S Manual preview
Outlaw Series
Brand: NRS Pages: 8
Rotostop as River 350 Owner'S Manual preview
River 350
Brand: Rotostop as Pages: 14
Sea Ray AMBERJACK 250 Owner'S Manual preview
AMBERJACK 250
Brand: Sea Ray Pages: 37

Brands by name

Popular brands

Load more brands