81
TYPICAL
1. Remove this screw
TYPICAL
1. Pull lens out
TYPICAL
1. Lift and remove bulb
The assembly is essentially the reverse
of removal procedures. However, pay
particular attention to the following:
Apply dielectric grease on bulb contact
surface.
When installing the bulb under the up-
per terminal plate, it is possible that
the bulb remains loose. The cover will
compress the terminal plate against
the bulb at reinstallation.
Stern Light
Unscrew lens counterclockwise and
pull it out.
1. Unscrew then pull
Pull bulb to remove it.
1. Pull bulb out
Apply dielectric grease on new bulb con-
tact surface.
The assembly is the reverse of remov-
al procedure.
F04H2RY
1
F04H2SY
1
F04H2TY
1
F04H2UY
1
F04H2VY
1
lmo2005-006a_1.book Page 81 Wednesday, July 7, 2004 1:06 PM
Summary of Contents for Utopia
