44
290 Amberjack
C
ARBON
M
ONOXIDE
M
ONITOR
The CO monitor is an electronic instrument that detects
CO, When a potential hazard exists, the monitor will
alert the occupants by a flashing DANGER light and
alarm.
The monitor is mounted in the cabin and operates
through a breaker located on the cabin DC distribution
panel.
It is extremely important that you become totally familiar
with your CO monitor and its functions.
SEE THE OWNER’S HANDBOOK IN YOUR OWNER’S
MANUAL PACKET FOR DETAILED INFORMATION AND
OPERATING INSTRUCTIONS.
Shifting From Shore Power to Generator Power:
1.
Turn all AC systems and branch circuit breakers OFF.
Turn both main breakers on the main distribution panel
OFF.
2.
Start the generator.
3.
Slide the source select shuttle mechanism on the main
distribution panel to expose the GENERATOR break-
er(s) and turn it ON.
4.
Turn the individual system breakers ON.
S
TOPPING
T
HE
G
ENERATOR
1.
Prior to generator shut down, turn OFF all AC equip-
ment and breakers including main breakers and allow
the generator to run a few minutes to cool down. If
desired, transfer to shore power.
2.
Stop the generator by pressing bottom half of the
START/RUN switch.
Summary of Contents for 290 Amberjack
