WELDING OF THE FRONT FIXATION TO THE GATE
Mount the front fixation so that it guarantees the perfectly horizontal position of the operator.
Depending on the type of the gate (wood, iron, aluminium) the front fixation can be welded or
screwed.
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
POSITIONING OF THE FRONT FIXATION
Once the operator has been mounted on the back fixation close the leaf and do as follows:
1) Release the operator (as in Fig. 36).
2) Pull out completely the chromium plated rod,
afterwards bring it back about 1 cm.
3) Fix the rod on the front fixation (Fig. 16).
4) Position the operator perfectly horizontal and mark the position of the front fixation (Fig. 15).
Attention:
Avoid the welding of the front fixation to the rod of the hydraulic operator already fixed as the
welding residual (squirt) could ruin the chromium -plating of the rod.
67411170
70 mm
Fig. 19
Fig. 15
Fig. 18
70 mm
63,5
mm
46 mm
ASSEMBLING OF FRONT FIXING MINI TANK VERSION WITH JOINT (TOP)
Welded front fixation
Srewed front fixation
Fig. 16
HALF TANK - MINI TANK
English
English
Fig. 17
24
REV 06 - 03/2015
Summary of Contents for HALF TANK
Page 22: ......
