10
For a correct installation follow carefully the indications below:
7.1.
Fix the angle irons with screws (not supplied), to the two extremities of the gate and fix the chain with the
provided tie rod (Fig. 22)
Fig. 22
Fig. 23
7.2.
Install the chain making it pass through the pinion group as in Fig. 24.
The chain must be always in line both vertically and orizontally, if not perfectly aligned (Fig. 25 and Fig. 26) it
may derail from the pinion group or the motor reducer risks a greater effort not allowing the right operating of
the system.
Fig. 24
