3) Post anchoring on the foundation plate
-
Place the casing so that the holes on the base match the
screws located on the foundation plate.
-
Make sure that the conduit for the cables goes through the large
hole of the casing base.
-
Fix the casing to the foundation plate screwing with care the
delivered dice and washers
Fig.4
English
Fig.3
Concrete
Foundation plate
to be levelled
60°
~
cla p open ng
m
i
Conduit
500
03
0
2) Foundation plate anchoring
-
Make a 500 x 500 x 300 mm (depth) hole in the
ground.
-
Widen the foundation plate clamps till they reach
approx. 60° (Fig. 3).
-
Fill the hole with R425 concrete and place the
foundation plate as shown in Fig. 3.
-
Accurately level the plate.
*
The middle hole of the plate must be used for cable
routing. Therefore, make sure that the conduit
connected to the hole complies with current
regulations, before filling the hole with concrete.
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Cod. 67410035 Rev 06 - 06/2010
17