1
2
3
E-11
CAUTION
Attaching and Detaching the Port
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the
O-ring contact surfaces.
CAUTION
Only the optional ports designed for SEA&SEA digital SLR camera housings
can be attached to this product.
Ports have different depth rating. Check the depth rating for each before
use.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
In order to use this product underwater, the optional port for the camera
lens must be attached to this product.
Lever Lock on the front case
by sliding it in the direction
of the arrow as shown in
the diagram, and rotate the
Port lock lever toward OPEN
(in a counterclockwise
direction) until it stops
Align the positioning mark( )
on the front case with the
positioning mark( ) on the
port, insert the port into the
front case, and then rotate
the port in a clockwise
direction until it stops
Positioning
mark
Port lock
lever
Lever Lock
Make sure that the positioning
mark( ) on the front case and
the positioning mark( ) on the
port are aligned
