External Controls
E-18
Flash closing lever, Movie-record lever, AF-ON lever
Push the lever to operate them.
When shooting without a focus / Zoom gear
:
CAUTION
The focus / zoom dial cannot be used if
there is no gear mounted on the lens.
When using a zoom gear, you cannot
shoot with manual focus.
If you will be shooting autofocus shots with the focus gear mounted on the
lens, make sure to use the shallow groove. If you set it to the deep groove,
it could damage the lens.
Pull the focus / zoom dial out and rotate
it so that the convex part of the dial is set
in the shallow groove on the spacer.
Movie-record lever
AF-ON lever
Flash closing lever
Shallow groove
Spacer
Exposure compensation button
Flash mode / flash compensation button
Deep groove
E-17
External Controls
While pressing the buttons, rotate the main
command dial or sub-command dial to make
operation settings.
* Selecting YES for "Release Button to Use Dial"
from the camera's custom settings menu allows
adjustments normally made by affected buttons
being held down and a command dial being
rotated to be made by rotation of the command
dial after the button is released. Refer to the
camera's instruction manual for details.
Power switch
By rotating the knob as shown, you can turn
the power ON/OFF and operate the illumina-
tion switch.
Focus / Zoom dial
When shooting with a focus / zoom gear:
Pull the focus / zoom dial out and rotate it
so that the convex part of the dial is set in
the deep groove on the spacer.
Release mode dial lock release, Release mode dial
Rotate the release mode dial while pressing
the release mode dial lock release button.
Exposure compensation button, Exposure mode / Formatting
memory cards button, Flash mode / flash compensation button
Power switch
Release mode dial
Release mode dial lock release
Exposure mode /
Formatting memory cards
button
