E-13
AA alkaline battery
●
AA Ni-MH battery
Installing the Batteries
1
2
3
4
Make sure that the mode
switch is in the OFF position
(Fig.1)
Turn the [ ]
mark
counterclockwise to the [ ]
mark position (Fig.1)
Pull the battery cap straight
out
When open a battery cap, always
pull battery caps sideways.
Insert four batteries with the
polarity shown in the battery
compartment. (Fig.2)
Be careful when opening the strobe battery compartment.
Remove the battery cap in a horizontal position to prevent
water drops from entering the battery compartment.
This model can be powered by the following batteries.
Use four of each type.
Fig.1
TTL
N
MIN
FULL
OFF
Battery cap
Mode switch
Fig.2