E-19
Taking Photographs
1
2
To check the mode switch
You can check whether the settings of the mode switch are
correct, by shooting the strobe with a digital camera. The number
of times a digital camera's built-in flash will fire differs depending
on the shoo
ting mode. If you change the shooting mode of the camera,
check the setting of the mode switch again for that mode.
Set the camera's built-in
flash to the forced-flash
mode, and mount the
camera to the housing.
Then, connect the housing
and this product together
with a fiber-optic cable.
Set the mode switch to [ ]
and the light level control
dial to [FULL], point the
digital camera at the front of
the strobe and shoot an
image.
The built-in flash of the camera
must flash.
3
Check the image captured by
the camera
If you see a white flash in the strobe or an image that is
completely white, then the strobe has fired and the setting is
correct.
If the image shows a dark reflection from the strobe, that
means that it is not synchronized and the strobe didn't fire.
Change the mode switch to [ ], try taking another picture,
and then check the new picture.