background image

STS11 Touchscreen Programmable Thermostat

 

68

IMPORTANT

 

The current day of the week should 
already be set correctly. If not, see 
Installer Setup to set the day.

 

Set Temperature Overrides 

The thermostat has three temperature 
override options: 

Override Until, 

Permanent Override

 and 

Vacation Hold

 

Override Until (TEMPORARY Override)

 

Holds temperature temporarily until the next 
scheduled period time or until time is 
selected. 

1. 

Press the Up or Down arrow below to the 

temperature you want to adjust. Override 
Until and set time appears on the screen. 

2. 

Press Up or Down arrow next to the Time 

to change the time to hold the adjusted 
temperature setting. 

 

3. 

If you want to exit Override Until, please 

press the CANCEL key. Override Until will be 
also exit until reach the set time. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Room

Set To

SYSTEM

SCHED

HOLD

CLOCK SCREEN

AUTO

FAN

TUE

HEAT

CANCEL

Override Until

PM

STS11 Touchscreen Programmable Thermostat

 

69 

Vacation Hold

 

Change temperature setting for a designated 
number of days.   

1. 

Press HOLD key twice. Screen shows 

Override Until and 1 DAYS.

 

2. 

Press the Up and Down arrow keys to set 

the desired temperature while away on 
vacation. Notice that —Override Until days is 
shown on the screen. (This is the time the 
Vacation Hold override expires after the 
number of day’s ends.)   

3. 

Press Up and Down arrow keys to change 

the number of Days you desire thermostat to 
override the schedule.   

 

Permanent Override 

Keep user set-point permanently. 

1. 

Press HOLD key once. Screen shows 

Permanent Override.

 

2. 

Press Up or Down arrow you want to 

adjust.

 

3. 

If you want to exit Permanent Override, 

press the HOLD key then press the CANCEL 
key.

 

"Running as SCHED" will appear 

indicating normal operation. 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Room

Set To

SYSTEM

SCHED

HOLD

CLOCK SCREEN

AUTO

FAN

TUE

HEAT

CANCEL

Permanent Override

PM

Summary of Contents for STS11














































Reviews: