Rev. 2013.08.19
33
LIMITED WARRANTY
Seaga warrants to the original purchaser that the equipment is free from defects in material and factory
workmanship for a period of one (1) year from date of shipment.
This warranty applies only if the equipment has been serviced and maintained in strict accordance with the
instructions presented in the Operator’s Manual and no unauthorized service, repair, alteration or disassembly
has been performed. Any defects caused by improper power source, poor water quality or pressure, an installed
water filtration system not fully functioning, abuse of the product, accident, alteration, vandalism, improper
service and maintenance schedules, neglecting to de-scale and sanitize on a regular basis, use of products or
ingredients not allowed in the machine, corrosion due to use of non-approved detergents or cleaning solutions,
or damage incurred during return shipment will not be covered by this warranty. Further, equipment that has had
the serial number removed, altered or otherwise defaced will not be covered by this warranty.
Lighting components, refrigerant, glass, paint, decals, fuses, filters or hygiene replacement parts, labor and/or
installation are not covered by this warranty.
Follow proper maintenance procedures and use of equipment, as described in the Operator’s Manual provided
on Seaga’s web site at seagamfg.com, which include but are not limited to:
Cleaning of equipment including regular maintenance
Proper installation and location of equipment with respect for the indicated temperature and humidity
levels
Proper use of equipment including loading, programming and setup
THIS WARRANTY IS EXCLUSIVE AND IS GIVEN BY SEAGA AND ACCEPTED
BY BUYER IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. ALL SUCH OTHER WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED BY SEAGA AND WAIVED BY BUYER.
Seaga neither assumes nor
authorizes any person to assume for it any obligation or liability in connection with the sale of
said unit(s) or any part(s) thereof.
Repair or replacement of proven defective parts is limited to manufacturing defects demonstrated under normal
use and service during warranty period. Contact Seaga’s Customer Care Department to be assigned a Return
Authorization (RA) number. Seaga requires complete information including the serial number(s) of the
machine(s), date of purchase and description of the part and/or suspected defect. Seaga may also be contacted,
with complete information, by phone: 815.297.9500, by fax: 815.297.1700 and also by email:
customercare@seagamfg.com
Send defective part(s), assembly or complete unit, Attention to the RA Number, prepaid or delivered to:
700 Seaga Drive
Freeport IL 61032
Seaga will repair or replace, at our option, any covered part which meets the provisions herein during the
warranty period. It is our discretion to replace defective parts with comparable parts. Seaga reserves the right to
make changes or improvements in its products without notice and without obligation, and without being required
to make corresponding changes or improvements in equipment already manufactured or sold.
SMI2456321
