Rev. 2012.02.27
6
Press Selection 5 to :
show the total cash OUT($) and (c)
#
Displays ****and--. **
then negative counter values (selection n, count xx)
Displays 0n.xx
then the “no load” battery voltage
Displays **.*0
then the “under load” battery voltage
Displays **.*0
Press Service Button to scroll to exit.
Price Setting
Price Setting can be done by entering Service Code PS.
Each selection can be allocated any price from 00.00 to 99.99, and is achieved by inserting coins to the vend amount and allocating
that amount to the desired selection(s).
1 Press the Red Service Button repeatedly until the LCD
Displays
PS.—
You are now in Price Setting Mode
2 Insert coins to the first desired price (for simplicity set the lowest price first)
Credit will accumulate on the display.
Displays
**. **
3 Press desired selection button to store displayed credit to that selection – a long bleep and a “Set” display will confirm that the
price has been programmed.
4 Insert additional coins if required and repeat for other selections.
5 Press Service Button to scroll to exit.
Prices may be set from 00.00 to
99.99
(depending upon coin
values)
. The default price setting is 1.00
Coin Value Setting
Coin Value setting allows for the changing of the individual values for the 6 coin outputs from the Coin Acceptor.
Values can be adjusted from 00.00 to 99.99 or can be set as a free vend token.
1.Press the Red Service button repeatedly until
You are now in the Coin Value setting Mode
You first need to set the value for the coin
Displays
Cn.--
2. Press Selection Button 1 to increment the --.** Value
Displays
00.**
3. Press Selection Button 2 to decrement the --.** Value
Displays
00.**
That is the cent/pence value set, now
we need
the
dollar/euro/pound value
4. Press Selection Button 3 to increment the **.- Value
Displays
**.??
5. Press Selection Button 4 to decrement the **.-Value
Displays
**.??
6. Press Selection Button 5 to set the coin as a Free vend
Token (pressing any other key reverts to a value)
Displays
FrEE
Now with the value on the display, insert the coin for which the value must
be assigned
