Seagate SkyHawk Product Manual, Rev. E
16
Drive Specifications
2.10
Electromagnetic Immunity
When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the
radio frequency (RF) environment as defined in
2.10.1 DC Magnetic Field Immunity
2.11
Reliability
Table 8
Radio Frequency Environments
Test
Description
Performance
Level
Reference
Standard
Electrostatic discharge
Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV
B
EN 61000-4-2: 95
Radiated RF immunity
80 to 1GHz, 3 V/m, 80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz
A
EN 61000-4-3: 96
ENV 50204: 95
Electrical fast transient
± 1 kV on AC mains, ± 0.5 kV on external I/O
B
EN 61000-4-4: 95
Surge immunity
± 1 kV differential, ± 2 kV common, AC mains
B
EN 61000-4-5: 95
Conducted RF immunity
150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine
A
EN 61000-4-6: 97
Power Frequency H-field immunity
1 A/m, 50Hz/60Hz, 3 axes
A
EN 61000-4-8: 97
Voltage dips, interrupts
30% Reduction for 25 cycles
>95% Reduction for 250 cycles
>95%, 0.5 cycles
C
C
B
EN 61000-4-11: 94
Table 9
DC Magnetic Field Immunity
Test
Product Spec (Standalone)
DC Magnetic Field Immunity
1, 2, 3
400 Gauss, RMS
1
Field in Gauss at the drive envelope. Testing per procedures 20800109-349 and 20800109-350.
2
Passing Field in Gauss at the drive envelope. In practice, testing is conducted using a fixed distance from the bottom of the mag-
net to the top of the drive. Calibration of the field vs. distance is done with a Hall probe with no magnetic materials present.
3
Testing to be done with magnet.375” dia. x 0.100” Ni-plated NdFeB; B,~11.5 kG, magnetized along its length; the magnet is ori-
ented with the length perpendicular to the drive cover/PCBA. Drive to be properly secured during test.
Non-recoverable read errors
1 per 10
14
bits read, max
Power-on hours per year
8760
Load/Unload (U/UL)
25°C, 50% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web page:
http://www.seagate.com/support/warranty-and-replacements/
.
From this page, click on the “Is my Drive under Warranty” link. The following are required to be provided:
the drive serial number, model number (or part number) and country of purchase. The system will dis-
play the warranty information for the drive.
