Seagate Technology SkyHawk ST1000LV000, Product Manual

Seagate SkyHawk Product Manual, Rev. E

  8

 Drive Specifications 

2.1

Formatted Capacity 

2.1.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to 

n–1, 

where

 n 

is

the number of guaranteed

sectors as defined above.

Refer to 

Configuring and Mounting the Drive

 on page 21 (words 60-61 and 100-103) for additional information about 48-bit addressing support 

of drives with capacities over 137 GB.

Non-Operational Shock

1000 Gs at 1 ms max

Linear Operating Vibration

5 - 200Hz @ 2.4 Grms ref

Rotational Operating Vibration

10 - 500Hz @ 15 rad/s

2

Vibration, non-operating

5–500 Hz: 5.0 Gs

Non-recoverable read errors

1 per 10

14 

bits read

Warranty

To determine the warranty for a specific drive, use a web browser to access the following web

page: 

http://www.seagate.com/support/warranty-and-replacements/

. 

From this page, click on the “Is my Drive under Warranty” link. The following are required to be

provided: the drive serial number, model number (or part number) and country of purchase. 
The system will display the warranty information for the drive.

Load-unload cycles

600,000 at 25°C, 50% rel. humidity 

Supports Hotplug operation per the

Serial ATA Revision 3.2 specification

Yes

1.

One GB equals one billion bytes when referring to hard drive capacity. 

Accessible capacity may vary depending on operating environment and formatting.

†

Seagate does not recommend operating at sustained case temperatures above 60°C.

Operating at higher temperatures will reduce useful life of the product.

*

The operating case temperature is 0 to 70°C (32 to 158°F).

The recommended measurement location can be found in 

Section 3.4, Drive Mounting

,

 Figure 6

 and

 Figure 8

.

Note

If the drive is powered-off before issuing flush cache command, in some instances, 

the end user data in the DRAM cache might not be committed to the disk.

Model

Formatted Capacity

(1)

1.

One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary 
depending on operating environment and formatting.

Guaranteed Sectors

Bytes per Sector

2TB model

2000 GB

3,907,029,168

512 (logical) / 

4096 (physical)

1TB model

1000 GB

1,953,525,168

Table 1

Drive Specifications Summary (continued)

Drive Specification

ST2000LV000

ST1000LV000