11
To attach the inner rails to the storage enclosure:
1. Examine the inner rails, locating the smooth inner edge of the rail, the flanged outer edge, and the rear top notch.
Figure 13 Left and right inner rail edge details
2. Orient the left inner rail so that the flat face at the front of the rail is to your right, the top notch is to your left, and the
smooth inner edge is away from you.
3. Face the left storage enclosure sidewall, then align the left inner rail's key holes to the six (6) pairs of sidewall T-pins.
Figure 14 Left inner rail alignment to storage enclosure chassis
4. Slide the inner rail toward the rear until it locks against the T-pins and the screw holes align.
Figure 15 Lock of rail against T-pins, alignment of screw holes to chassis sidewall
5. Secure the rail by inserting and tightening five (5) M3 screws with the T10 Torx to a torque of 12 lbf-in (1.36 N-m).
