So ware
The Lyve Client app (available for Windows and macOS operating systems) is required to unlock Lyve
Mobile Array devices. The app must be installed on a Windows or Mac computer connected to the
management network.
Network protocols
Service Loca on Protocol (SLP)
The Lyve Client app relies on the Service Location Protocol (SLP) to discover Lyve Mobile devices on the
network. For automatic detection, the following is required:
SLP broadcast messages using UDP port 427 must be allowed in the network environment.
IP assignments to all computers and devices are performed by a DHCP server on the network.
The computer running Lyve Client and Lyve Mobile Rackmount Receiver's Ethernet management port
must be connected to the same subnet.
If your company's IT policies prevent SLP network broadcasting, you can use other methods for detecting the
device in Lyve Client. See Alternative methods for device detection below.
84
Lyve Mobile Rackmount Receiver
7/26/22
Summary of Contents for Lyve Mobile Array
